Overview

• Multiple Broadcasting - Suitable for pushing video stream via RTMP (H.264 only supported) to Wowza Streaming Engine, YouTube, Twitch, Ustream, Facebook Live, Livestream, Wirecast, vMix etc. to do broadcasting. It also supports stream pushing via dual addresses. Audio might not be so good when streaming live video to YouTube.
• Multiple Applications - Applicable not only for basic CCTV surveillance, but also for live broadcasting like video conference, video game, telemedicine, remote teaching, major events, WeMedia etc. Full color at night with warm light.
• Multiple Protocols - TCP/IP, DHCP, DNS, DDNS(3322, Oray, Dyndns), HTTP, RTSP, RTMP, VoIP, SNMP, IEEE802.1X, ONVIF, Multicast and other protocols supported. It's compatible with Hikvision private protocol which allows it to work with iVMS-4200/8700 and video recorded at H.265 with Hikvision's NVR.
• Multiple Languages - English, Traditional Chinese, Simplified Chinese, Russian, Germany, Japanese are available(It might vary from different firmware versions). It can automatically match the system language of user's PC which is much easier for you.
• Cross Browsers - Real cross browsers are supported like IE, Edge, Google Chrome, Firefox, Safari etc. With user-friendly UI, you can also preview live video directly via browser, set audio as AAC, set the bitrate as 500(recommended), insert your logo(jpg at 200x200px) and OSD text, and remote upgrade etc.

Specification

Quick Start

Connection Diagram

Power on IP Camera and connect it to router via ethernet cable.

• Tips: At the very beginning, it's strongly recommended to follow this instructions to connect the camera, especially for network segment issues.

Download & Install

Download IPCManager

Go to Technical Support->Select IP Camera->Download IPCManager->Select corresponding version to download

Install IPCManager

Follow below steps to install IPCManager:

• Right click the application and run as administrator;
• Select the corresponding language from the drop-down list (English, Polish, Russian, Japanese, German, Simplified Chinese, Traditional Chinese are available for Windows. Only English for MAC version.)
• Click Next-->Next-->Install

Download ActiveX

Go to Technical Support->Select IP Camera->Download IPCManager->Select corresponding version to download

Install ActiveX

Install ActiveX after downloading with administrator and restart your PC.

Configure IP

Configure IP via IPCManager

• Run IPCManager (If you already installed it)
• Enter username & password (admin & 12345 by default)
• Select the encoder you would like to set
• Click checkbox of DHCP-->Modification-->Close-->Refresh

• NOTE: please ensure the IP camera and your PC are on the same network segment if it’s connected to the same router. That’s why it’s recommended to use DHCP to obtain IP address to make it for sure.

Access Encoder

Access Encoder from a Browser

• Start a browser like IE, Chrome, Firefox (Chrome Recommended);
• Enter the IP address you configured above via IPCManager;
• Enter username (admin) and password (12345 by default);

• Click “Login” and the Preview page opens in your browser

• Tips: Generally it's recommended to access the IP Camera from Chrome.

Adjust Focus

Adjust Focus(If Available)

• 1 means Zoom Out: long press until you think it ok.
• 2 means Zoom In: long press until you think it ok.
• 3 means Reset: reset to default focus if you wrongly zoom in/out.

• Tips: At the every beginning, it's strongly recommended for you to use the reference values to start streaming because much more uplink bandwidth will be consumpted. Or else it might affect the effect of pushing.

Configure Audio

Configure Parameters of Audio

• Go to Configuration-->Video & Audio-->Audio-->Audio
• Click checkbox to “Enable audio”; Audio codec format set as “AAC”;
• Sampling rate set as “16000” or higher;
• Input volume set as “39” or so(Reference Value: users can log into GUI and set sampling rate as 24000 or higher if better voice quality is required because the default sampling rate here is 8000.)

• Tips: Sampling Rate at most 16000 for 8MP IP Camera.

Configure Video

Configure Parameters of Video

• Go to Configuration-->Video & Audio-->Video-->Video
• Bit rate set as 500(Reference Value: users can set higher bit rate to remove mosaic but it should be matched to your network bandwidth because of uplink bandwidth used.)
• Key interval set as 10(Reference Value: users can set lower key interval to get better image quality.)

• Tips: At the every beginning, it's strongly recommended for you to use the reference values to start streaming because much more uplink bandwidth will be consumpted. Or else it might affect the effect of pushing.

Configure RTMP

Configure PUSH URL of RTMP

• Go to Configuration-->Network-->RTMP-->RTMP-->Enable(True)
• Enter Push URL: copy Stream URL and Stream Key from YouTube Studio into column of Push URL below

• Go back to YouTube Studio after setting RTMP PUSH URL to check whether it's on live or not.

User Manual