- LTE-A Cat 6 module with M.2 form factor, optimized for M2M and IoT applications.
- Support LTE-A carrier aggregation.
- Worldwide LTE-A and UMTS/HSPA(+) coverage.
- Multi-constellation GNSS receiver available for applications requiring fast and accurate fixes in any environment.
- Feature refinements: supports DFOTA and DTMF.
- MIMO technology meets demands for data rate and link reliability in modem wireless communication systems.
- LTE Cat 6: EM06-E M.2
- Region/Operator: EMEA/APAC①/Brazil
- Dimensions (mm): 42.0 × 30.0 × 2.3
- Operation Temperature: -30°C ~ +70°C
- Extended Temperature: -40°C ~ +85°C
- LTE-FDD: B1/B3/B5/B7/B8/B20/B28/B32②
- LTE-TDD: B38/B40/B41
- 2xCA: B1+B1/B5/B8/B20/B28; B3+B3/B5/B7/B8/B20/B28; B7+B5/B7/B8/B20/B28; B20+B32②; B38+B38; B40+B40; B41+B41
- WCDMA:B1/B3/B5/B8
- GNSS(Optional): GPS/GLONASS/BeiDou (Compass)/Galileo/QZSS(Optional)
- Europe: Deutsche Telekom*
- Australia: Telstra
- Global: GCF
- Europe: CE
- Taiwan (China): NCC
- Australia & New Zealand: RCM
- North Africa: ICASA
- WHQL/RoHS Compliant
- LTE-FDD Data Rate (Mbps): 300 (DL)/ 50 (UL)
- LTE-TDD Data Rate (Mbps): 226 (DL)/ 28 (UL)
- DC-HSPA+ Data Rate (Mbps): 42 (DL)/ 5.76 (UL)
- WCDMA Data Rate (Kbps): 384 (DL)/ 384 (UL)
- (U)SIM: x2
- I2C: x1
- PCM (Digital Audio): x1
- Antenna Tuner Control* (ANTCTL): x4
- USB 2.0: x1
- W_DISABLE1#: x1
- RESET#: x1
- WAKE_ON_WAN#: x1
- WWAN_LED#: x1
- Antennas: x3 (Main, Diversity and GNSS Antennas)
- Speech Codec Modes: AMR/AMR-WB
- Echo Arithmetic: Echo Cancellation/Noise Suppression
- VoLTE: CSFB and VoLTE (Voice over LTE) (Optional)
- MIMO (2x2, 4x2, DL): ●
- Digital Audio and VoLTE (Voice over LTE): Optional
- (U)SIM Card Detection: ●
- DTMF: ●
- Dual SIM Single Standby*: ●
- DFOTA: ●
- GNSS: ●
- USB Serial Driver: Windows7/8/8.1/10, Linux 2.6~5.4, Android 4.x/5.x/6.x/7.x/9.x
- GNSS Driver: Android 4.x/5.x/6.x/7.x/8.x/9.x
- RIL Driver: Android 4.x/5.x/6.x/7.x/8.x/9.x
- NDIS Driver: Windows 7/8/8.1/10
- MBIM Driver: Windows 8/8.1/10, Linux 3.18~5.4
- GobiNet Driver: Linux 2.6~5.4
- QMI_WWAN Driver: Linux 2.6~5.4
- Supply Voltage Range: 3.135V~4.4V, 3.7V Typ.
- Power Consumption: 50μA @Power off; 4.1mA @Sleep Typ.; 22.1mA @Idle
- 1. * means Under Development.
- 2. ● means supported.
- ① Excluding Japan and CMCC.
- ② LTE-FDD B29 and B32 support receiving only, and are only for secondary component carrier in 2×CA.