Overview

Multiple Broadcasting - Suitable for pushing video stream via RTMP (H.264 only supported) to Wowza Streaming Engine, YouTube, Twitch, Ustream, Facebook Live, Livestream, Wirecast, vMix etc. to do broadcasting. It also supports stream pushing via dual addresses. Audio might not be so good when streaming live video to YouTube.
Multiple Applications - Applicable not only for basic CCTV surveillance, but also for live broadcasting like video conference, video game, telemedicine, remote teaching, major events, WeMedia etc. Full color at night with warm light.
Multiple Protocols - TCP/IP, DHCP, DNS, DDNS(3322, Oray, Dyndns), HTTP, RTSP, RTMP, VoIP, SNMP, IEEE802.1X, ONVIF, Multicast and other protocols supported. It's compatible with Hikvision private prococol which allows it to work with iVMS-4200/8700 and video recorded at H.265 with Hikvision's NVR.
Multiple Languages - English, Traditional Chinese, Simplified Chinese, Russian, Germany, Japanese are available(It might vary from different firmware versions). It can automatically match the system language of user's PC which is much easier for you.
Cross Browsers - Real cross browers are supported like IE, Edge, Google Chrome, Firefox, Safari etc. With user-friendly UI, you can also preview live video directly via brower, set audio as AAC, set the bitrate as 500(recommended), insert your logo(jpg at 200x200px) and OSD text, and remote upgrade etc.

Specification

Basics	Default	User: admin; Password: 12345; IP: 192.168.120(DHCP);
	Model	ZSD3WSH16F: 3MP, Dual Light, Fixed Lens ONLY
	Sensor	1/2.8" Progressive Scan CMOS Sensor
	Mode	IR ON when no human is detected, Warm Light ON when human is detected, Automatically removable infrared-cut filter
	Lens	2.8mm/3.6mm/6mm/8mm[Optional]
	WDR	80dB
	Electric Shutter	Adaptive, 1/2s-1/1,000s
Video & Audio Encoding	Video Encoding	H.265/H.264 Video Encoding
	Audio Encoding	AAC/G.711U/G.711A Audio Encoding; Audio Sampling up to 16K
	Bit Rate	CBR & VBR; 256kbps~8Mbps [Adjustable]
	Frame Rate	50Hz: 1-25fps; 60Hz: 1-30fps [Adjustable]
	Main Sream	23041296, 19201080, 1280*720
	Sub Stream	704576, 640360, 640480, 352288
	RTSP(Main Stream)	rtsp://192.168.1.120:554/Iive/0
	RTSP(Sub Stream)	rtsp://192.168.1.120:554/Iive/1
Protocol	Network Protocol	IPv4/IPv6, TCP/IP, DHCP, HTTP, UDP, RTP, PPPOE, SMTP, UPNP, VOIP
	Video Protocol	CGI, RTSP, RTMP, ONVIF, HTTP, SIP, 802.1x
	Wireless Protocol	Available by Default
Interfaces	Network Interface	1ch RJ45 10M/100M Self Adaptive Ethernet Port
Interfaces	Audio Interface	Built-in Audio BY DEFAULT
Others	Working Environment	Temparature：-30°C~60°C (-22°F~140°F); Humidity: ≤95% (Non-Condensing)
	Power Input	Powered by DC12V 1A or Higher (Included by Default)
	Power Consumption	≤5W
	Unit Dimension	18.5cm x 7.7cm x 7cm[7.28in x 3.03in x 2.76in]
	Package Dimension	19.5cm x 10.5cm x 10cm[7.68in x 4.13in x 3.94in]
	Net Weight	397g [0.88lb, 14.00oz]
	Gross Weight	480g [1.06lb, 16.93oz]
Package Contents	1x 3MP Dual Light Wireless Waterproof Compact Bullet Live Streaming IP Camera 1x Easy-to-Install Bracket 1x Matched Power Adapter DC12 2A 1x Attached Accessories
NOTE	Audio might not be so good when streaming live video to YouTube.

Quick Start

Connection Diagram

Power on IP Camera and connect it to router via ethernet cable.

Tips: At the very beginning, it's strongly recommended to follow this instructions to connect the camera, especially for network segment issues.

Download & Install

Download IPCManager

Go to Technical Support->Select IP Camera->Download IPCManager->Select corresponding version to download

Install IPCManager

Follow below steps to install IPCManager:

Right click the application and run as administrator;
Select the corresponding language from the drop-down list (English, Polish, Russian, Japanese, German, Simplified Chinese, Traditional Chinese are available for Windows. Only English for MAC version.)
Click Next-->Next-->Install

Download ActiveX

Go to Technical Support->Select IP Camera->Download IPCManager->Select corresponding version to download

Install ActiveX

Install ActiveX after downloading with administrator and restart your PC.

Configure IP

Configure IP via IPCManager

Run IPCManager (If you already installed it)
Enter username & password (admin & 12345 by default)
Select the encoder you would like to set
Click checkbox of DHCP-->Modification-->Close-->Refresh

NOTE: please ensure the IP camera and your PC are on the same network segment if it’s connected to the same router. That’s why it’s recommended to use DHCP to obtain IP address to make it for sure.

Access Encoder

Access Encoder from a Browser

Start a browser like IE, Chrome, Firefox (Chrome Recommended);
Enter the IP address you configured above via IPCManager;
Enter username (admin) and password (12345 by default);

Click “Login” and the Preview page opens in your browser

Tips: Generally it's recommended to access the IP Camera from Chrome.

Adjust Focus

Adjust Focus(If Available)

1 means Zoom Out: long press until you think it ok.
2 means Zoom In: long press until you think it ok.
3 means Reset: reset to default focus if you wrongly zoom in/out.

Tips: At the every beginning, it's strongly recommended for you to use the reference values to start streaming because much more uplink bandwidth will be consumpted. Or else it might affect the effect of pushing.

Configure Audio

Configure Parameters of Audio

Go to Configuration-->Video & Audio-->Audio-->Audio
Click checkbox to “Enable audio”; Audio codec format set as “AAC”;
Sampling rate set as “16000” or higher;
Input volume set as “39” or so(Reference Value: users can log into GUI and set sampling rate as 24000 or higher if better voice quality is required because the default sampling rate here is 8000.)

Tips: Sampling Rate at most 16000 for 8MP IP Camera.

Configure Video

Configure Parameters of Video

Go to Configuration-->Video & Audio-->Video-->Video
Bit rate set as 500(Reference Value: users can set higher bit rate to remove mosaic but it should be matched to your network bandwidth because of uplink bandwidth used.)
Key interval set as 10(Reference Value: users can set lower key interval to get better image quality.)

Tips: At the every beginning, it's strongly recommended for you to use the reference values to start streaming because much more uplink bandwidth will be consumpted. Or else it might affect the effect of pushing.

Configure RTMP

Configure PUSH URL of RTMP

Go to Configuration-->Network-->RTMP-->RTMP-->Enable(True)
Enter Push URL: copy Stream URL and Stream Key from YouTube Studio into column of Push URL below

Go back to YouTube Studio after setting RTMP PUSH URL to check whether it's on live or not.

3MP Dual Light Bullet Security Camera, HD 3MP Wireless IP Camera, Compatible with Hikvision, 2.8mm, IP66, RTMP to YouTube, Facebook etc.