now is modern browser EXVIST Cares
  • български език
  • čeština
  • Dansk
  • Deutsch
  • ελληνικά
  • English
  • Español
  • eesti
  • suomi
  • Français
  • हिन्दी
  • hrvatski jezik
  • magyar
  • Bahasa Indonesia
  • Italiano
  • 日本語
  • 한국인
  • lietuvių kalba
  • latviešu valoda
  • Bahasa Melayu
  • Norsk Bokmäl
  • Nederlands
  • Polskie
  • Português (Brasil)
  • Română
  • Pусский
  • Slovenčina
  • Slovenski jezik
  • Svenska
  • ไทย
  • Türkçe
  • Tiếng Việt
  • Amerikka(USD $)
    Lisätty ostoskoriin
    Välisumma
    Alennus
    Alennus
    Ostoskorin välisumma
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.
    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.

    H.265 1080P HDMI Video Encoder W/Storage RTMP RTSP SRT TS UDP HLS HTTP ONVIF Hikvision Protocol for IPTV Live Streaming to YouTube Facebook etc.

    Embedding the logo into the UI when Qty>30pcs; Laser engraving the logo on the housing when Qty>200pcs; OEM/ODM Services Available
    $146.57 USD $0.00 USD
    Free worldwide shipping
    Free returns
    Carbon neutral
    Secure payments
    Model
    ON-DMI-16E
    Plug Type
    EU Plug
    US Plug
    AU Plug
    UK Plug
    Ship From
    CN
    EU
    US
    AU
    UK

    AMAZON US   AMAZON CA   AMAZON UK   AMAZON DE   AMAZON FR   AMAZON IT   AMAZON ES   AMAZON NL   AMAZON SE   AMAZON PL   AMAZON TR   AMAZON JP   AMAZON SA   AMAZON AU   AMAZON SG   AMAZON AE

    Overview

    • Multiple Broadcasting - Suitable not only for pulling stream to your own server via TS (H.265/H.264 supported) like IPTV, but also for pushing stream via RTMP (H.264 only supported) to Wowza Streaming Engine, YouTube, Twitch, Ustream, Facebook Live, Livestream, Wirecast, vMix etc. to do broadcasting. It also supports stream pushing via dual addresses.
    • Multiple Applications - Applicable for IPTV, video conference, video game, telemedicine, remote teaching, major events, WeMedia etc. live broadcasting, CCTV surveillance, NVR, recording system etc.
    • Multiple Protocols - TCP/IP, DHCP, DNS, DDNS(3322, Oray), HTTP, RTP, RTSP, RTMP, TS, UDP, ONVIF, Multicast etc protocols supported. It's compatible with Hikvision private prococol which allows it to work with iVMS-4200/8700 and video recorded at H.265 with Hikvision's NVR.
    • Cross Browsers - Real cross browers supported like IE, Microsoft Edge, Google Chrome, Firefox, Safari etc. With user-friendly UI, you can also preview live video directly over browsers, set audio as AAC, bitrate as 500(recommended), insert your logo(jpg at 200x200px) and OSD text, and remote upgrade etc.
    • Recording & Download - Pretty easy to record real-time videos if you'd like to save them into the inserted SD card (max. 256G) in MP4, just pressing the reset/record button for one second. Just press it again and it will stop recording. Easy to preview and download the recorded videos by accessing the encoder.

    Specification

    SOC
    Basic: User: admin; Password: 12345 Static IP: 192.168.1.120 (Default)
    Model: ON-DMI-16E (Max. 50fps)
    Video/Audio Encoding Video Encoding: H.265/H.264
    Audio Encoding: AAC/G.711A/G.711U; Sampling: 32K/48K/64K/128K/256K or 8000Hz(NVR)
    Bitrate: Constant Bitrate(CBR)/Variable Bitrate(VBR); 64kbps-12Mbps(Configurable)
    Frame Rate: 50Hz: 1-25fps; 60Hz: 1-30fps(Configurable)
    Main Stream: 1920*1080、1600*900、1440*1050、1440*900、1360*768、1280*1024、1280*720
    Sub Stream: 704*576、640*480、640*352、352*288、320*240
    Video Stream
    TS (Main Stream): http://192.168.1.120:80/ts/0
    TS (Sub Stream): http://192.168.1.120:80/ts/1
    HLS (Main Stream): http://192.168.1.120/hls/0.m3u8
    HLS (Sub Stream): http://192.168.1.120/hls/1.m3u8
    RTSP (Main Stream): rtsp://192.168.1.120:554/live/0
    RTSP (Sub Stream): rtsp://192.168.1.120:554/live/1
    UDP: udp://@224.1.2.3:10000
    Protocols TCP/IP、DHCP、DNS、DDNS、HLS、HTTP、RTP、RTSP、RTMP、SRT、TS、UDP、ONVIF
    Interface Network Port: RJ45 10M/100M Self Adaptive Ethernet Port
    HDMI: 1ch HDMI Input
    Audio: 1ch 3.5mm Line-in Port
    Power: 1ch DC12V Power Input
    Reset/Record: 1ch Reset/Record(Press it for one second to start/stop recording, Press it for more than 5 seconds to reset)
    SD Card Slot: 1ch Micro SD Card Slot(Max. 128G)
    Others







    Operating Temperature: -10℃~+55℃[14°F~131°F]
    Operating Humidity: ≤95%(Non-Condensing)
    Power Supply: DC12V 1A or Higher
    Power Consumption: ≤3W
    Unit Dimension: 109mm x 74mm x 25mm[4.29in x 2.9in x 0.98in]
    Package Dimension: 220mm x 150mm x 60mm[8.7in x 5.9in x 2.4in]
    Net Weight: 186g[0.41lb, 6.56oz]
    Gross Weight: 385g[0.85lb, 13.58oz]
    Application
    IPTV Satellite Modulator/Hotel TV System
    CCTV Camera/Camcorder
    UAV Image Transmission/DLSR Camera
    Drone/DV/FPV/Medical Equipment
    Digital Signage/Video Conference
    Online Live Streaming Broadcast or Server
    Teaching/Campus Broadcast/Telemedicine
    Multimedia Stitching Display
    NVR/Recording System

    Package Include

    1x HDMI Video Encoder
    1x DC12V 1A Power Adapter
    1x HDMI Cable(1M)
    1x Ethernet Cable(1M)
    1x Live Broadcasting Quick Guide

    Quick Start

    Connection Diagram

    Power on encoder and connect it to router via ethernet cable

    NOTE: At the very beginning, it's strongly recommended to follow this instructions to connect the encoder, especially for network segment issues. If it's failed to be discovered by Device Manager, please refer to Failure of Detection or Upgrading which might be helpful.

    Download & Run

    Download Device Manager

    Download Device Manager from the following link: EncDeviceTool V1.05.

    NOTE: Windows Available ONLY at this moment. MAC Under Planning. For details, please refer to Device Manager.

    Run Device Manager

    • Open the file folder of EncDevice;
    • Double click "EncDeviceTool.exe" and then it will work

    Configure IP

    Configure IP via Device Manager

    • Open the file folder of EncDevice
    • Double click "EncDeviceTool.exe" and then it will work
    • Click "Refresh" -->Enter username and password at the right bottom side;
    • Select the device-->Enter Start IP & IP Gateway-->Click "Modify"

    NOTE: If the encoder and your PC are not on the same network segment, even if they are connected to the same router, it may be necessary to modify the IP address to resolve connectivity issues. This adjustment is crucial to ensure that the devices can communicate effectively and to prevent potential access problems when trying to reach the encoder from Chrome or any other web browser. Here are the general steps for modifying the IP address if the devices are not on the same network segment:
    • Identify Current IP Address: Determine the current IP address of the device and your PC. Check the IP configuration to see whether they are on the same network segment. You can do this by accessing the network settings of each device.
    • Modify IP Address: If the devices are not on the same network segment, modify the IP address of the device to ensure it is within the same network range as your PC. This may involve assigning a new static IP address to the device that falls within the same subnet as your PC.
    • Update Subnet Mask and Gateway: Along with modifying the IP address, ensure that the subnet mask and gateway settings are correctly configured to match the network segment of your PC. This will help establish proper communication between the devices.
    Once these modifications are made and both devices are on the same network segment, attempt to access the device from Chrome. With the IP addresses aligned on the same network segment, you should have an improved chance of successfully accessing the device and resolving any prior connectivity issues. For more details, please refer to TCP/IP.

    Video Tutorial of IP Configuration

    • Go to CMD->ipconfig/all-->Check the IP of your PC like 192.168.X.7;
    • Go to Device Managaer-->Manually enter the IP like 192.168.X.129
    • Then go to check whether it's accessible or not now.

    Access Encoder

    Access Encoder from a Browser

    • Start a browser like IE, Chrome, Firefox (Chrome Recommended);
    • Enter the IP address you configured above via Device Manager;
    • Enter username (admin) and password (12345 by default);
    • Click “Login” and the Preview page opens in your browser

    NOTE: If you encounter issues accessing an encoder from the Chrome, particularly if you receive an error message stating that the page cannot be reached, it could point to a potential network segment issue. This issue is typically related to the configuration of IP addresses and network settings. To resolve this issue, it may be necessary to configure the IP address to ensure that both your PC and the encoder are on the same network segment. This involves configuring the IP settings to ensure that both devices are within the same IP address range and subnet. Here are the general steps to address the network segment issue by configuring the IP address: Ensure that your PC and the encoder are connected to the same network.
    • Access the network settings on your PC and the encoder to configure the IP address, subnet mask, and gateway settings. This typically involves accessing the network adapter properties in the device settings.
    • Set the IP address of both devices to be within the same network segment. For example, if the PC has an IP address of 192.168.1.2, the encoder should also have an IP address in the same range, such as 192.168.1.X (where X is a unique value not already assigned to another device on the network).
    • Ensure that the subnet mask settings are identical for both devices.
    Configuring the IP addresses to be within the same network segment can help resolve connectivity issues and enable successful access to the encoder from the Chrome.

    Configure Video

    Configure Parameters of Video

    • Go to Setting-->Video/Audio-->Video
    • Key Interval set as 10(Reference Value)
    • Bitrate set as 500(Reference Value)

    • Tips: At the every beginning, it's strongly recommended for you to use the reference values to start streaming because much more uplink bandwidth will be consumpted. Or else it might affect the effect of pushing.

    Configure RTMP

    Configure PUSH URL of RTMP

    • Go to Setting-->Push-->RTMP-->Check the checkbox of Enable
    • Enter Push URL: copy Stream URL and Stream Key from YouTube Studio into column of Push URL below

    Check YouTube Studio

    Go back to YouTube Studio after setting RTMP PUSH URL. After setting the RTMP PUSH URL for live streaming to YouTube, you can check if the stream is live in YouTube Studio. If the stream appears to have failed, consider the following steps for troubleshooting:
    Check DNS Settings: Ensure that the DNS settings for your network and the streaming device are configured correctly. The Domain Name System (DNS) translates domain names to IP addresses, so if there are issues with DNS resolution, it can affect the ability to reach the streaming server.

    • Verify HDMI Signal: Confirm that the HDMI signal from the video source (e.g., a camera or encoder) is detected and properly configured for streaming. Issues with the HDMI signal can affect the quality and availability of the video stream.
    • Enable AAC: Ensure that the AAC audio encoding is enabled by default. Enabling AAC as the audio codec by default is important for ensuring compatibility with YouTube's streaming platform and requirements because YouTube's streaming requirements include the use of AAC as the audio codec for live video streaming.
    • Adjust Bitrate: If the uploading bandwidth is insufficient for the selected bitrate, consider reducing the bitrate to a lower level (e.g. 500) that matches the available bandwidth. Lowering the bitrate can help ensure a stable and consistent stream, especially if the network conditions are limiting the available bandwidth.

    After performing these checks and adjustments, you can attempt to go back to YouTube Studio and verify if the live stream is successful. It's important to review the settings and configurations to ensure that all components are optimized for live streaming to YouTube.

    Complete Video Tutorial of Encoder Series

    Model Comparison

    GK72 & PRO ENCODER SERIES
    Part Number ON-DMI-16E ON-DMI-16EW ON-DMI-16EP ON-DMI-16D ON-DMI-16DW ON-DMI-16DP
    Part Name 1080P Basic HDMI Encoder w/SD Card Slot for Recording 1080P WiFi HDMI Encoder w/SD Card Slot for Recording 1080P PoE HDMI Encoder w/SD Card Slot for Recording 1080P Basic HDMI Encoder w/HDMI Loopout, SD Card Slot for Recording 1080P WiFi HDMI Encoder w/HDMI Loopout, SD Card Slot for Recording 1080P PoE HDMI Encoder w/HDMI Loopout, SD Card Slot for Recording
    Encoding Max. 1ch Encoding
    Video Input 1ch HDMI Input, Max. 1920*1080P@50/60FPS
    System Mode Switchable, 2*1080P@25/30+D1@25/30 or 1*1080P@50/60
    Frame Rate Up to 25/30 or 50/60, Configurable, Determined by System Mode
    Encoding Performance Max. 1080p@55fps, Tested by Playing RTSP Stream in PotPlayer
    Video Output 1ch Output by Ethernet 1ch Output by HDMI Output or Ethernet
    HDMI Output Unavailable Max. 1920*1080P@60fps
    Audio Input Embedded over HDMI or 3.5mm Line-In
    Audio Output Output by Ethernet
    Local Recording Built-in Micro SD slot for Local Recording, Max. 128GB
    Interfaces 1x HDMI In, 1x 3.5mm Line-In Audio Jack, 1x Micro-SD Slot, 1x Hardware Reset Button, 1x RJ45 1x HDMI In, 1x HDMI Out, 1x 3.5mm Line-In Audio Jack, 1x Micro-SD Slot, 1x Hardware Reset Button, 1x RJ45
    Screen Not Supported Customizable, Displaying IP Address, Video/Audio Source Not Supported

     

    MC30 ENCODER SERIES
    Part Number ON-DMI-30B ON-DMI-30BW ON-DMI-30BP ON-DMI-30D ON-DMI-30DW
    Part Name 1080P Basic HDMI Encoder w/HDMI Loopout, USB2.0 for Recording 1080P WiFi HDMI Encoder w/HDMI Loopout, USB2.0 for Recording 1080P PoE HDMI Encoder w/HDMI Loopout, USB2.0 for Recording 1080P Basic HDMI Encoder w/Screen, HDMI Loopout, USB2.0 for Recording 1080P WiFi HDMI Encoder w/Screen, HDMI Loopout, USB2.0 for Recording
    Encoding Max. 1ch Encoding
    Video Input 1ch HDMI Input, Max. 1920*1080P@50/60FPS
    System Mode Switchable, 2*1080P@25/30+D1@25/30 or 1*1080P@50/60
    Frame Rate Up to 25/30 or 50/60, Configurable, Determined by System Mode
    Encoding Performance Max. 1080p@60fps, Tested by Playing RTSP Stream in PotPlayer
    Video Output 1ch Output by HDMI Output or Ethernet
    HDMI Output Max. 1920*1080P@60fps
    Audio Input Embedded over HDMI or 3.5mm Line-In
    Audio Output Embedded over HDMI or 3.5mm Line-out
    Audio Mix Supported, Available for Latest Firmware ONLY, Combining Audio from HDMI and Line-In to Output, But Decrease Volume for Active Audio 
    Local Recording Built-in USB2.0 for Local Recording, Max. 128GB
    Interfaces 1x HDMI In, 1x HDMI Out, 1x 3.5mm Line-In, 1x 3.5mm Line-Out, 1x USB2.0, 1x Hardware Reset Button, 1x RJ45
    Screen Not Supported Built-in OLED, Displaying IP Address, Video/Audio Source

     

    TV30 CODEC SERIES
    Part Number ON-DMI-30B ON-DMI-30BW ON-DMI-30BP ON-DMI-30D ON-DMI-30DW
    Part Name 1080P Basic HDMI Encoder|Decoder w/HDMI Loopout, USB2.0 for Recording 1080P WiFi HDMI Encoder|Decoder w/HDMI Loopout, USB2.0 for Recording 1080P PoE HDMI Encoder|Decoder w/HDMI Loopout, USB2.0 for Recording 1080P Basic HDMI Encoder|Decoder w/Screen, HDMI Loopout, USB2.0 for Recording 1080P WiFi HDMI Encoder|Decoder w/Screen, HDMI Loopout, USB2.0 for Recording
    Encoding | Decoding Max. 2ch encoding & decoding, including 1ch HDMI input, up to 3ch decoding input
    HDMI Input Max. 1920*1080P@60FPS, Encoding Up to 30FPS ONLY
    Frame Rate Up to 25/30, Configurable
    Decoding Input Max. 1ch 4K or 3ch 1080p SQ/RTSP/RTMP/TS network stream decoding input from IP camera, encoder etc. If it's required to decode 1ch 4K or 3ch 1080p, HDMI input should be disabled to make it valid.
    USB Input Not Supported, Built-in USB2.0 for Local Recording ONLY
    Image Fusion Supported, 1ch/2ch/3ch image fusion preview and output
    Video Output 1ch/2ch/3ch image fusion output by HDMI loopout or network stream
    HDMI Output Max. 1920*1080P@30fps
    Audio Input Embedded over HDMI or 3.5mm Line-In
    Audio output Embedded over HDMI or 3.5mm Line-Out
    Audio Mix Supported, Available for Latest Firmware ONLY, Combining Audio from HDMI and Line-In to Output, But Decrease Volume for Active Audio 
    Local Recording Built-in USB2.0 for Local Recording, Max. 128GB
    Interfaces 1x HDMI In, 1x HDMI Out, 1x 3.5mm Line-In, 1x 3.5mm Line-Out, 1x USB2.0, 1x Hardware Reset Button, 1x RJ45
    Screen Not Supported Built-in OLED, Displaying IP Address, Video/Audio Source

     

    SS50 CODEC SERIES
    Part Number ON-DMI-50B ON-DMI-50BW ON-DMI-50BP ON-DMI-50D ON-DMI-50DW
    Part Name 1080P Basic HDMI Encoder|Decoder w/HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing 1080P WiFi HDMI Encoder|Decoder w/HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing 1080P PoE HDMI Encoder|Decoder w/HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing 1080P Basic HDMI Encoder|Decoder w/Screen, HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing 1080P WiFi HDMI Encoder|Decoder w/Screen, HDMI Loopout, Dual USB2.0 for Webcam/Recoding/Playing
    Encoding|Decoding Max. 4ch encoding & decoding, including 1ch HDMI input, up to 4ch decoding input, up to 2ch USB input
    HDMI Input Max. 1920*1080P@60FPS, Encoding Up to 30FPS ONLY
    Decoding Input Max. 1ch 4K or 4ch 1080p SQ/RTSP/RTMP/TS network stream decoding input from IP camera, encoder etc.
    USB Input Max. 2ch USB2.0 webcam input, compatible with Hikvision, Logitech's webcam
    Image Fusion Supported, 1ch/2ch/3ch/4ch image fusion preview and output
    Video Output 1ch/2ch/3ch/4ch image fusion output by HDMI loopout or network stream
    HDMI Output Max. 3840*2160P@30fps, Configurable From System Settings
    Audio I/O Embedded over HDMI or 3.5mm Line-In/Out
    Audio Mix Supported, Available for Latest Firmware ONLY, Combining Audio from HDMI and Line-In to Output, But Decrease Volume for Active Audio 
    USB Port 2ch USB2.0, available for 1080p Webcam/recording/playing
    Local Recording Built-In USB2.0 for Either Webcam or Local Recording, Max. 128GB
    Interfaces 1x HDMI In, 1x HDMI Out, 1x 3.5mm Line-In/Out, 2x USB2.0, 1x Hardware Reset Button, 1x RJ45
    Screen Not Supported Built-in OLED, Displaying IP Address, Video/Audio Source

     

    SS52 ENCODER SERIES
    Part Number ON-DMI-52B ON-DMI-52BW ON-DMI-52BP ON-DMI-52D ON-DMI-52DW
    Part Name 4K Basic HDMI Encoder w/HDMI Loopout, Dual USB2.0 for Recoding/Playing 4K WiFi HDMI Encoder w/HDMI Loopout, Dual USB2.0 for Recoding/Playing 4K PoE HDMI Encoder w/HDMI Loopout, Dual USB2.0 for Recoding/Playing 4K Basic HDMI Encoder w/Screen, HDMI Loopout, Dual USB2.0 for Recoding/Playing 4K WiFi HDMI Encoder w/Screen, HDMI Loopout, Dual USB2.0 for Recoding/Playing
    Encoding Max. 1ch Encoding
    Video Input 1ch HDMI Input, 4K@30Hz, Max. 3840*2160P@30FPS, 1920*1080P@60FPS
    System Mode Switchable, 1*2160P@25/30+D1@25/30 or 1*1080P@50/60
    Frame Rate Up to 25/30 or 50/60, Configurable, Determined by System Mode
    Encoding Performance Max. 2160p@30fps, Tested by Playing RTSP Stream in PotPlayer
    Video Output 1ch Output by HDMI Output or Ethernet
    HDMI Output Max. 3840*2160P@30fps, Configurable From System Settings
    Audio I/O Embedded over HDMI or 3.5mm Line-In/Out
    Audio Mix Supported, Available for Latest Firmware ONLY, Combining Audio from HDMI and Line-In to Output, But Decrease Volume for Active Audio 
    Local Recording Built-in USB2.0 for Local Recording ONLY, Max. 128GB
    Interfaces 1x HDMI In, 1x HDMI Out, 1x 3.5mm Line-In/Out, 2x USB2.0, 1x Hardware Reset Button, 1x RJ45
    Screen Not Supported Built-in OLED, Displaying IP Address, Video/Audio Source

    Download Firmware

    How can we access the page of download firmware?

    It's only visible for our registered users. The reason why you are unable to access the page to download the firmware is likely because EXVIST Cares requires users to register and log in before you can access certain resources, such as firmware downloads. In order to access the download page, you may need to create an account on the Help Center and log in with your credentials. Alternatively, if you believe you should have access but are experiencing issues, you may want to reach out to the our support team for further assistance.
    NOTES: As a registered user, you will be able to access and download firmware, submit tickets for technical support, and leave comments or questions regarding any issues you may encounter.

    How can we determine which firmware version we should download?

    Encoder/Codec Series Related Models Remark
    GK72 MS7 Encoder Series (Visible to Registered Users Only) ON-DMI-16EON-DMI-16EWON-DMI-16EPON-DMI-16EMON-DMI-16EC. The serial numbers are started with GKE2023. The serial numbers will be started with 16E later;
    GK72 MS7 Encoder Pro Series (Visible to Registered Users Only) ON-DMI-16DON-DMI-16DWON-DMI-16DP. The serial numbers will be started with 16D later;
    GK72 TP9 AHD Encoder Series (Visible to Registered Users Only) ON-DMI-16AH. The serial numbers are started with 16A. The serial numbers will be started with 16A later;
    MC30 ITE Encoder Series (Visible to Registered Users Only) ON-DMI-30BON-DMI-30BWON-DMI-30BPON-DMI-30DON-DMI-30DWON-DMI-16DM(Decoder)HDMI Encoder Series The serial numbers will be started with 30B later;
    SS52 MS7 Encoder Series (Visible to Registered Users Only) ON-DMI-52BON-DMI-52BWON-DMI-52BPON-DMI-52DON-DMI-52DW The serial numbers will be started with 52B later;
    TV30 ITE Codec Series (Visible to Registered Users Only) ON-DMI-30BON-DMI-30BWON-DMI-30BPON-DMI-30DON-DMI-30DWTV-MIX Series The serial numbers will be started with 30T later;
    SS50 MS7 Codec Series (Visible to Registered Users Only) ON-DMI-50BON-DMI-50BWON-DMI-50BPON-DMI-50DON-DMI-50DW, TV-MIX Series The serial numbers will be started with 50B later;
    GK72 ITE Encoder Series (Visible to Registered Users Only) ON-DMI-16EON-DMI-16EWON-DMI-16EPON-DMI-16EM. The serial numbers are started with GKE2022 or GTE2024. Will be gradually discontinued. If you prefer this series, it's acceptable for customization.
    H16E ITE Encoder Series (Visible to Registered Users Only) ON-DMI-16E, ON-DMI-16EW, ON-DMI-16EP, ON-DMI-16EM (Very Old Hardware) Discontinued
    H16D ITE Encoder Series (Visible to Registered Users Only) ON-DMI-16D, ON-DMI-16DW, ON-DMI-16DP, ON-DMI-16DM (Very Old Hardware) Discontinued

    Wholesale

    Please contact us via email or visit ON-DMI-16E on http://www.exvistream.com